time for using safely after finishing (general):
Walking on and bearing was not allowed 24h
and 72h respectively after finishing. Clearing
with water was allowed only after the floor
was finished 7 days.
time for reaching the ideal rigidity and climate-resistant:
The function of the floor coating system was
up to the ideal rigidity and climate-resistant
stability completely after finishing 7 days.
cleanness and sanitation:
Cleanness and sanitation are necessary in
the process of using resin floor :a. To avoid
scraping by grinding and rolling, clearing regularly
is necessary if there are sands、grits、dusts
and other granules of rigid material on the
surface of the floor.b. Paying attention not
to bring grit and sand into workshops when people
entrant in.c. Different cranes should be used
where the inner and the outer of the workshops
and storehouse to avoiding scraping.d. The water
and detergent were allowed to use to cleaning
the floor only after being finished 7 days.
against striking and scraping
a.Do not striking directly by the over-weight
machine and things.
b.Do not scraping by the keen-edged things.
c.Cranes、barrows 、big chairs and metal frames,
if used, should be fitted with rubber wheels
or rubber braces.
waste oil and chemistry solvent in time:
Epoxy floor need to maintain clean carefully
although it can resist acid and alkali in some
degree. All the waste water、 oil、acidic and
alkaline solvent should be cleaned as soon as
possible, removing them within 24h is preferred.
the Epoxy floor regularly is not only convenient
to clear but useful for mending and closing
floor just finished need to be protected specially.
To the workshop with the floor just finished,
it is usual for many other companies to enter
to make installation and decoration. The following
special protections are needed:
a.All the people enter in and out only from
one entrance which preferred to be guard by
b.Peoples should put off the shoes and change
the soft slipper to enter the workshop.
c.The sand 、grit and mud should not be carried
to the workshops.
d.The rigid things should not be dragged and
hauled on the floor.
e.To avoid spoiling and contaminating the floor,
it is necessary for some exercises like electric
welding and painting to put some insolate
material on the exercise locale.
f.Keep watch all the time is preferred.